I4 Inverter
THE ABSOLUTE LATEST TECHNOLOGY IN RESISTANCE SPOT WELDING

Weld Features:

• 2-sided spot welding

• 1-sided spot welding

• Spot hammer system

• Nut and bolt welding 

• Heat shrinking

• Contact shrinking

• I4 delivers extreme weld power with single sided welding

• I4 Extension Arm System allows access to hard to reach areas. Different sizes are available. 600mm arm (optional)

• The cable comes in handy when welding roof panels.  It holds up the weight for you!

• Totally flexible.  The smart cable holder follows you where ever you place the spot gun.

I4 SPOT GUN FEATURES

• EASY! Push Button  to compress and push button to open electrode holder out to widen the gap.
• SMART! the wide 5" (127mm) gap, allows access to hard to reach areas.
• Switching between electrode arms is easy with the I4! loosen the handle and pull out the C-Arm. Slide desired extension arm into position. Tighten the handle and your ready to weld.

TECHNICAL DATA

•     Input voltage: 208-230v or    400v 3-phase 50/60Hz

• Welding amperage: 9500A max

• Output voltage: 15V

• Cable length: 9,8' (3m) standard

• Electrode Pressure: At 7 bars  (90PSI)-280DaN(616Lb)

• Cooling system: Air (2 fans)

• Welding cable cooling: Air and water cooling

• Extension arm system: Up to 600mm(23.6") reach 

• Micro precessor program: 6 menus
  

Also available in the Pro Spot line:

Pro Spot PR-6

Pro Spot PR-6 features:

• Two sided spot welding

• Single sided welding

• Spot hammer welding

• Nuts and Bolts welding

• Carbon shrinking

• Contact shrinking

• Moulding clip rivet welding

TECHNICAL DATA

• Input voltage: 208-230V or 400V 1-phase

• Welding amperage: 6500 A max

• Output voltage: 7V

• Cable length: 1.8m (6') standard

• Electrode Pressure: At 7 bars (90 PSI)-280 DaN (616lb)

• Welding cable cooling: Air cooling

• Extension arm system: Up to 600mm (23.6") reach

• Digital controlled current and weld time

Pro Spot PR-10

EXCLUSIVE PR-10 Features:

• 6mm WELD DIAMETER at structural strength

• LIQUID COOLED, loop system through transformer and welding head

• WEIGHT BALANCED SYSTEM, adjusts welding height form ground level to 8' (2.5 m)

• PATENTED EXTENSION ARM SYSTEM, to weld hard to reach areas

• ADJUSTABLE ELECTRODE PRESSURE from the control panel.

• Weight balanced welding head

• Weld height: Floor to 8.5' (2.5m)

• Nothing touches the floor...except your feet!

• Always connected, ready to weld

• Stores out of the way when not in use

• No cables, air hoses or welders on the floor

• Moves extremely easy... just direct the welding head to where you want to weld...it's that easy!

TECHNICAL DATA

• Input voltage: 208V, 230V, 380V, 415V, 50/60 Hz.

• Open circuit voltage- 4.5V

• Output capacity-45KvA

• Welding amperage at the tips-10,500A

• Duty cycle- continuous (50%)

• Electrode pressure- 220DaN (Max.)

• Fuse protection- 220V-50A, 400V-32A

• Safety Approvals-CE, ETL